Description
Battleaxe Silencer Adapter for G36C 14mm CCW to 14mm CCW
This Battleaxe silencer adapter is designed for G36C-style AEGs and has a 14mm counter-clockwise (CCW) thread at both ends. It threads onto the rifle’s 14mm CCW muzzle and gives you a 14mm CCW mounting point further forward, making it easier to fit a mock suppressor, tracer unit or flash hider to the compact G36C.
The G36C’s short barrel and the shape of its front end can make some suppressors awkward to fit or leave them sitting at an unusual position. An adapter like this extends the thread so your muzzle device sits cleanly, and it can also give the rifle a more balanced look with a suppressor attached.
Why 14mm CCW?
14mm CCW is the standard muzzle thread for most airsoft rifles and accessories. Because this adapter uses that thread on both ends, it works with a wide range of suppressors and tracers designed for airsoft.
Fitting
Remove the existing flash hider from your G36C, then screw the adapter onto the muzzle thread. Tighten by hand until it is secure, without over-tightening. Fit your suppressor or tracer to the front thread, then check the bore is clear and centred by looking through the barrel from the front with the battery disconnected.
Key features
- Silencer adapter for G36C-style rifles
- 14mm CCW to 14mm CCW thread
- Fits standard airsoft suppressors and tracers
- Simple screw-on fitting
- From Battleaxe
Compatibility
Designed for G36C-style airsoft rifles with a 14mm CCW muzzle thread. G36C replicas vary, so check your rifle’s muzzle before ordering. Any suppressor or tracer used with it must have a 14mm CCW thread.
Care and maintenance
Check the adapter is tight before each game. Keep the threads clean and lightly oiled with silicone oil to stop them seizing. If a BB strike ever occurs inside the suppressor, check alignment straight away.
Who is it for?
G36C owners who want to fit a suppressor or tracer neatly and securely, whether for a cleaner look on the skirmish field or for tracer use in night games and indoor sites.
