Description
ACM 7.4V 1300mAh 30C / 60C LiPO Airsoft Battery
This ACM battery is a 7.4V, 1300mAh lithium polymer (LiPo) pack with a 30C continuous and 60C burst discharge rating. A 7.4V LiPo is the most common choice for standard AEGs, giving a crisp trigger response and good rate of fire without putting excessive strain on a standard gearbox.
ACM supplies a wide range of affordable spares and accessories, and a pack like this is an easy way to add a spare battery to your kit so you can swap out a flat pack between games instead of sitting out.
Understanding the numbers
The 7.4V rating is the nominal voltage of the two-cell pack. The 1300mAh capacity determines how long it will run before needing a charge, and is a good middle ground between compact size and running time.
The C rating describes how much current the pack can safely deliver: 30C continuous with short bursts up to 60C. That is plenty for a typical AEG, and it helps the pack stay healthy under the bursts of high current that a motor draws on each trigger pull.
Charging and safety
LiPo packs must be charged on a charger designed for lithium batteries, ideally a balance charger connected to the pack’s balance lead. Never charge a LiPo unattended, and use a fire-safe LiPo bag for charging and storage.
Do not run the pack completely flat, as over-discharging permanently damages lithium cells. A MOSFET with low-voltage protection helps prevent this. The connector type is not stated in the details we hold, so please check the product images, or contact us, to make sure it matches your replica.
Key features
- 7.4V nominal voltage
- 1300mAh capacity
- 30C continuous / 60C burst discharge rating
- LiPo chemistry: light and powerful
- Suits AEGs designed to run on 7.4V
- Useful spare for longer game days
Compatibility
Check that your replica is suitable for a 7.4V LiPo battery and that this pack will fit your battery space before ordering, as stock tubes, handguards and buffer tubes vary in size. Check the connector in the product images, and fit an adapter or change the connector if it does not match your replica. Use only a lithium-compatible charger.
Care and maintenance
Store the battery at storage charge if you will not use it for a few weeks, rather than fully charged or completely flat. Keep it in a LiPo-safe bag away from heat, and check it regularly for swelling, damage to the wrap or loose wires; a puffed or damaged pack should be safely disposed of and not used. Always unplug the battery from the replica after a game.
Who is it for?
A good battery for AEG owners whose replica is set up for a 7.4V LiPo, and who want a spare pack or a step up from older NiMH batteries.
Please note: Always charge LiPo batteries under supervision with a suitable charger, and wear suitable eye protection when using airsoft replicas.
