APS 1 Joule Nozzle for X1

Description

APS 1 Joule Nozzle for X1

This is an APS replacement nozzle, listed as a 1 Joule nozzle for the APS X1. The nozzle carries air or gas into the hop-up and pushes each BB into position, so its design affects how efficiently every shot is used, and changing it can change the replica’s power.

APS is a Hong Kong airsoft manufacturer known for its own designs across electric, gas and spring-powered replicas, and it supplies spare and tuning parts for its range. We also stock a 1 Joule nozzle listed for the APS X2.

What it is for

As the name says, this nozzle is intended for a 1 Joule set-up, which is useful when a site or game area has a lower power limit, for example for close-quarters play. We do not hold further details of the X1 model or of how this nozzle differs from the standard part, so please check the product images, or contact us with your replica’s model, before ordering.

Results always depend on the individual replica, its condition, the temperature and the BB weight, so have the replica chronographed after fitting and before play.

Fitting

Make sure the replica is unloaded and its gas or power supply is removed before you start. Follow the manual’s instructions for removing the nozzle, note the position of any springs or O-rings as they come out, and check that the new nozzle moves freely once fitted.

If you are not confident working on your replica, have the part fitted by an experienced technician. Keep small screws and springs in a tray while you work, and test the replica carefully with no BBs, gas or battery connected before using it in a game.

Key features

• APS replacement nozzle
• Listed for a 1 Joule set-up
• Listed for the APS X1
• Useful for lower-limit sites and game areas
• Genuine APS part

Compatibility

Listed for the APS X1. Nozzles are specific to the replica’s design, so please confirm your model before ordering, and do not assume it fits other APS models or other makers’ replicas.

Spare parts are often specific to one manufacturer, and sometimes to one production version, so please compare this part with the one you are replacing, or contact us with your replica’s make and model, before ordering.

Care and maintenance

Use only silicone-based lubricants on the nozzle and any O-rings, and avoid over-oiling, as excess oil can reach the hop-up rubber and cause inconsistent shots. Keep the replica clean, use good quality seamless BBs and store it unloaded and dry.

Who is it for?

It is for APS X1 owners who need a 1 Joule nozzle for lower-limit sites or game areas, or who want to keep a spare to hand.

Please note: Tools are not included. Always have your replica chronographed after fitting and before play.