Description
APS CAM130 O-Rings for 88g Charger (Gas)
These are APS replacement O-rings, part code CAM130, listed for an 88g charger. An 88g charger lets a replica run from a larger 88g CO2 cartridge rather than smaller capsules, and the O-rings are what keep the connection gas tight.
O-rings are wear items. Each time a cartridge is fitted and removed, and as rubber ages, they can flatten, nick or harden, which leads to leaks. Keeping a set of the correct spares means you can fix a leak quickly instead of losing a game day.
About the part
APS identifies its parts by code, and these O-rings are listed under CAM130 for the 88g charger. The name does not say how many O-rings are in the pack, so please check the product images, and use the part code and your manual to confirm they are the ones you need.
Fitting
Always make sure the charger is completely empty of gas, with no cartridge fitted, before you start. Remove the old O-rings carefully with a plastic pick so you do not scratch the grooves, clean the grooves, then lightly oil the new O-rings with silicone oil and roll them into place without stretching them more than necessary.
Using 88g cartridges safely
Follow the replica’s instructions for fitting and removing cartridges, never try to remove a cartridge while it still holds gas, and store cartridges away from heat and direct sunlight.
Key features
- Genuine APS replacement O-rings
- Part code CAM130
- Listed for an 88g charger
- Restores a gas-tight connection
- Useful spares for anyone running 88g CO2
Compatibility
Listed for an 88g charger. Please check the part code CAM130 against your replica’s manual before ordering, as APS parts are often specific to one model.
Spare parts are often specific to one manufacturer, and sometimes to one production version, so please check your replica’s make and model, and compare this part with the one you are replacing, before ordering. If you are unsure, contact us with details of your replica and we will help.
Care and maintenance
Use only silicone-based lubricants on rubber seals and O-rings. Petroleum-based oils and solvents can make rubber swell and break down, which causes leaks.
Put a drop of silicone oil on the O-rings when you fit a new cartridge, and inspect them for nicks or flattening whenever you change cartridges.
Store spare parts in a sealed bag or small box, somewhere cool and dry and away from direct sunlight, so rubber and polymer parts do not dry out or deform before you need them.
Who is it for?
These O-rings are for owners of APS replicas that use an 88g charger with the CAM130 O-rings and need to fix or prevent leaks.
Please note: The charger, CO2 cartridges and replica are not included.
