Description
Crosman Centerpoint Red Laser Pointer with Weaver RIS and Pressure Pad
This is a Crosman Centerpoint red laser pointer, supplied with a Weaver-type rail mount and a remote pressure pad switch. It projects a visible red dot onto your target, giving you a quick aiming reference for close-range and fast-moving shooting.
Crosman is a long-established name in airguns and shooting accessories, and its Centerpoint range covers optics, lights and lasers for airguns, airsoft and target shooting. A compact laser like this is a simple add-on for a pistol, rifle or shotgun replica with an accessory rail.
Aiming with a laser
A laser shows you roughly where the replica is pointing without needing to bring a sight up to your eye, which can help when shooting from awkward positions, around corners or from the hip. Lasers are easiest to see in dim light, indoors and in shaded woodland, and the red dot is harder to see in bright sunlight.
Zero the laser to your replica at a typical engagement distance so the dot matches where the BBs land. Keep in mind that a BB’s flight curves while the laser beam is straight, so the dot will only line up exactly at the distance you set it for.
Using the pressure pad
A pressure pad is a remote switch on a short cable. You stick or strap it to the grip or handguard where your fingers naturally rest, and squeezing it turns the laser on only while you hold it. That keeps the beam off until the moment you want it, so you do not give your position away or waste battery.
Route the cable along the rail or handguard and secure it with cable ties or rail clips so it cannot snag on kit or branches.
Key features
- Crosman Centerpoint laser pointer
- Red laser dot
- Weaver-type rail mount included
- Remote pressure pad switch
- Compact enough for pistols and rifles
- Quick aiming reference in low light
What’s in the box
- Red laser pointer
- Weaver RIS mount
- Pressure pad switch
Compatibility
Weaver and Picatinny (20mm) rails share the same basic profile, so a Weaver-type mount will usually clamp onto either. Picatinny rails have evenly spaced, slightly wider slots, and some Weaver-mount cross bolts do not suit every Picatinny slot, so check the fit on your rail. A short length of rail is needed on your replica, under the barrel, on the handguard or on the side of a scope.
Make sure there is room on your rail for the laser alongside other accessories, such as a torch or foregrip, and that the pressure pad cable can reach where you want to fit the pad.
Care and maintenance
Remove the batteries if the laser will not be used for a while, as old batteries can leak and damage the contacts. Wipe the lens with a soft, clean cloth, and keep the switch and pressure pad cable free of mud.
Check the mount is tight before each game and recheck the zero if the laser has been knocked. Store it somewhere dry, coiling the pressure pad cable loosely rather than folding it sharply.
Who is it for?
This laser suits players and target shooters who want an affordable red aiming dot for indoor and low-light shooting, and anyone kitting out a railed replica with a classic laser set-up.
Please note: Battery details: please check the product images or packaging. Never point a laser at anyone’s eyes, including your own, and never at aircraft or vehicles. Many airsoft sites restrict or ban lasers during games, so check your site’s rules before fitting one for play.
