Description
Double Bell Metal VSR-10 (425fps – 201-A)
The Double Bell Metal VSR-10 (model 201-A) is a spring-powered bolt-action sniper rifle based on the hugely popular VSR-10 platform, listed at 425fps. It is aimed at players looking for an affordable route into the sniper role, with the reassurance of a platform that is supported by more upgrade parts than almost any other airsoft rifle.
Double Bell is known for producing good-value replicas, and its VSR-10 follows the familiar layout pioneered by Tokyo Marui. That means a slim, comfortable stock, a straightforward bolt action and an internal design that most airsoft technicians know inside out.
How a spring bolt-action works
Working the bolt compresses the main spring and loads a BB into the chamber. When you pull the trigger, the spring drives a piston forward, pushing a burst of air behind the BB. There is no battery and no gas, so the rifle performs the same in any weather, it is almost silent apart from the shot itself, and there is very little to go wrong. Each shot is deliberate, which suits the patient, observant style that sniping rewards.
Handling and setup
Fit a quality scope with sturdy mounts, set the hop-up carefully for your BB weight, and zero the scope at your usual engagement range. Heavier BBs are the usual choice for bolt-action rifles, as they carry their energy further and are less affected by wind. A sling and a bipod are worthwhile additions for long games.
Customisation
The VSR-10 platform is one of the most widely supported in airsoft, so there is an enormous choice of upgrade parts: trigger units, cylinders and pistons, hop-up chambers and rubbers, precision inner barrels and stocks. You can start with the rifle as supplied and improve it step by step as your skills and budget grow.
Key features
- VSR-10 style bolt-action sniper rifle
- Spring powered: no battery or gas needed
- Metal version, listed at 425fps
- Consistent performance in any weather
- Compatible with a wide range of VSR-10 upgrade parts
- Model 201-A
Compatibility
Follows the VSR-10 pattern, so many VSR-10 compatible upgrade parts, magazines and accessories will fit, although fit can vary between manufacturers. Check any part against Double Bell VSR-10 compatibility, or ask us, before ordering. Many sites require spring-powered sniper rifles to fire heavier BBs and observe minimum engagement distances.
Care and maintenance
Do not leave the rifle cocked for long periods, as this weakens the spring; store it uncocked. Clean the inner barrel regularly with a cleaning rod and soft patch, use good quality seamless BBs, and keep the bolt and moving parts lightly lubricated as recommended in the manual. Wipe the outside down after wet games and store the rifle in a dry case.
Who is it for?
Players who want to try the sniper role on a sensible budget, and those who enjoy building up a rifle over time with upgrade parts.
Please note: Always wear suitable eye and face protection. Check your site’s power limits and minimum engagement distances for bolt-action rifles before play.
