Northeast Famas GBB Front Nozzle NGR01NOZ0001

Description

Northeast Famas GBB Front Nozzle NGR01NOZ0001

This is a replacement front nozzle for the Northeast FAMAS gas blowback rifle, part number NGR01NOZ0001. The front nozzle is the tip of the loading nozzle assembly that pushes each BB into the hop-up and seals against the rubber, so its condition has a direct effect on feeding and consistency.

Front nozzles take a lot of wear in a gas blowback rifle, and a chipped or deformed tip is a common reason for misfeeds and inconsistent shots. Keeping a genuine Northeast replacement on hand makes it a quick, inexpensive repair.

About the Northeast FAMAS GBB

Northeast’s FAMAS GBB is a gas blowback replica of the French bullpup rifle. A retailer listing of the Northeast FAMAS F1 GBB describes it as running on green gas or CO2, with a full-travel steel bolt, an adjustable hop-up in the chamber and a metal gas magazine.

What the front nozzle does

Each time the bolt goes forward, the nozzle picks up a BB from the magazine and pushes it into the hop-up, then seals against the hop-up rubber so the gas goes behind the BB rather than escaping around it. A damaged tip can let gas bypass the BB, push BBs in unevenly or scratch the rubber.

Signs that the front nozzle needs attention include misfeeds, double-feeds, flyers and a drop in power. When you replace it, check the hop-up rubber at the same time for damage. Using the correct Northeast part, rather than a generic or modified substitute, is the surest way to keep the fit and gas seal that the replica was designed around.

Key features

• Replacement front nozzle
• Part number NGR01NOZ0001 (as named)
• For the Northeast FAMAS GBB (as named)
• Restores reliable BB feeding
• Helps keep a good seal at the hop-up
• Inexpensive, quick repair

Compatibility

Made for the Northeast FAMAS GBB, as named. Parts for other FAMAS replicas are not interchangeable. If you are unsure which version you own, contact us with a photo or the details of your rifle before ordering. We also stock a complete Northeast FAMAS GBB loading nozzle unit if your nozzle assembly needs more than the front part replacing.

Care and maintenance

Gas blowback parts are made to close tolerances. If you are not confident stripping your replica, we recommend having the part fitted by an airsoft technician. Follow the manual’s disassembly steps, work on a clean surface so small springs and pins are not lost, and take photos as you go so reassembly is straightforward.

Lubricate seals and O-rings only with silicone oil. Petroleum-based oils and solvents make rubber swell and break down, which causes leaks.

Keep the replica clean and use good quality seamless BBs, as dirt and broken BBs are a common cause of wear on nozzles, feed parts and seals. Store the replica somewhere cool and dry.

Who is it for?

This front nozzle is for Northeast FAMAS GBB owners dealing with misfeeds or a damaged nozzle tip, and for anyone who wants an inexpensive spare to keep their rifle running.

Please note: This is a single replacement part as named; the listing does not state any other contents, so please ask us if you need to know before ordering.