Description
Tokyo Marui Lip Set for 17 Series Magazine
This is a set of replacement magazine lips for Tokyo Marui 17 series gas pistol magazines. Tokyo Marui is the Japanese manufacturer whose gas blowback pistols are widely regarded as the benchmark for consistency and accuracy, and many other makers base their designs on Marui’s. This set is listed for the magazines of Marui’s 17 series of polymer-framed gas pistols.
The magazine lip is the part at the top of the magazine that holds the next BB in position, ready to be pushed into the hop-up by the loading nozzle. It also helps form the path the gas takes from the magazine into the nozzle. Because it is pressed against and passed over by the nozzle and slide every time the pistol cycles, the lip slowly wears, and it can crack or deform after a drop or years of heavy use.
Signs the lip needs replacing
Typical symptoms of a worn lip are misfeeds and double-feeds, BBs popping out of the top of the magazine when it is handled, the last few BBs not feeding, or gas escaping around the top of the magazine instead of going through the nozzle. Inspect the lip under good light: chips, splits or a flattened front edge are clear signs it should be changed.
Fitting
Make sure the magazine is completely empty of gas before you start. The lip is usually held in place by a pin or by the top cover of the magazine; on some designs the follower and spring need to be controlled while the lip is removed, so work carefully and note the position of every part. Fit the new lip, reassemble in reverse order, then load a few BBs and check that they are held securely before refilling with gas.
Key features
- Set of replacement magazine lips for Tokyo Marui 17 series gas magazines
- Restores reliable BB feeding
- Helps cure misfeeds and BBs falling out of the magazine
- Helps the magazine seal properly against the nozzle
- Inexpensive alternative to a new magazine
- Tokyo Marui spare part
Compatibility
Listed for Tokyo Marui 17 series gas magazines. Many other makers produce 17-pattern pistols, and their magazines may not take Marui parts. Compare with your existing part before ordering, and ask us if you are unsure which one you need.
Care and maintenance
Use good-quality seamless BBs, keep the top of the magazine free of dirt and grit, and wipe it with a cloth after games in muddy or dusty conditions. Apply a drop of silicone oil to the magazine seals and the gas route seal now and then so they stay supple.
Avoid dropping loaded magazines onto hard ground, which can chip or crack the lip, and store magazines in a pouch or case rather than loose in a kit bag. Do not leave magazines charged with gas for long periods in a hot car or in direct sunlight.
Who is it for?
This part is for owners of Tokyo Marui 17 series gas pistols who want to cure feeding problems caused by a worn or damaged magazine lip, or keep a spare on hand.
Please note: This listing is for the lip set only; the magazine is not included. The number of lips in the set is not stated, so please check the product photos. Always wear suitable eye protection when testing a replica.
