Description
UFC Quick Release Mount for SRS Style 1×38 Red Dot (Black)
This black UFC Quick Release Mount is made for SRS-style 1×38 red dot sights. It replaces a screw-on base with a lever-operated clamp, so you can take your sight off the rail or refit it in a few seconds without tools.
The SRS style is a distinctive large-window, closed red dot, and many airsoft versions are supplied on a basic mount that needs a screwdriver or coin to remove. A quick-release mount makes the sight far more practical if you move it between replicas, take it off to protect it in transport, or simply like to strip your kit down for cleaning after a game. UFC produces affordable mounts and optics for airsoft players.
How it works
The upper part of the mount attaches to the base of an SRS-style 1×38 sight, while the lower part clamps to the rail with a quick-release lever. Flip the lever open to remove the sight; close it to lock it back in place. Check the product photos to see the exact lever design and how the sight attaches.
Once your sight is zeroed, note the rail slot you used. Refitting it to the same slot each time helps the sight return close to its previous point of aim, so you spend less time re-zeroing at the safe zone.
Why upgrade the mount
A quick-release mount is particularly useful for players who own more than one primary but only one good sight, or who need to remove the optic to fit a replica into a bag or case. It also lets you take the sight off quickly if it gets wet or muddy so it can be dried properly.
Make sure the lever is set with enough tension to stay firmly closed under recoil and knocks; a sight that shifts on the rail will not hold zero.
Key features
- Quick-release mount for SRS-style 1×38 red dots
- Lever clamp for tool-free fitting and removal
- Lets you move one sight between replicas
- Fits a standard top rail
- Black finish
- Makes cleaning and transport easier
Compatibility
Made for SRS-style 1×38 red dot sights and a standard 20mm Picatinny-style rail. SRS-style sights from different makers can vary slightly in their base design, so compare your sight with the product photos before ordering. The sight itself is not listed as included.
Care and maintenance
Wipe the mount clean after every game and keep sand and grit out of the lever and clamp, as debris can stop it closing fully. Check the lever tension and the screws holding the sight to the mount before each game day, and avoid over-tightening screws into the sight body.
A very small amount of light oil on the lever pivot now and then keeps it moving smoothly; wipe off any excess so it does not collect dirt.
Who is it for?
Owners of an SRS-style 1×38 red dot who want to fit and remove it without tools, or move it between replicas.
Please note: The red dot sight shown in any photos is not listed as included. Please check your sight’s base against the photos before ordering.
