Description
WE 2.0 Green Gas (Green) Bottle (800ml)
WE 2.0 Green Gas comes in a large 800ml green bottle and is made for gas-powered airsoft replicas such as gas blowback pistols and green gas rifles. WE are a well-known Taiwanese airsoft manufacturer, best known for their gas blowback pistols and rifles, and their own gas is a natural partner for those replicas.
An 800ml bottle is a sensible size for regular players. It refills a lot of magazines between purchases and means you are far less likely to run dry halfway through a game day than with a small can. If you run more than one gas replica, a large bottle is usually the more economical choice.
How to fill a gas magazine
Hold the can upside down so liquid gas flows out, and press the nozzle firmly and straight onto the magazine’s fill valve. Fill in short bursts and stop when gas starts to spit back from the valve; that means the magazine is full. Overfilling wastes gas and can stress the seals. Let the magazine sit for a moment to warm up before you start shooting.
Gas performance drops in cold weather because the gas cannot expand as quickly. On cold days keep spare magazines in an inside pocket or pouch close to your body, and give the replica a short pause between strings of shots so the magazine can recover.
Storage and safety
Store the can upright somewhere cool and dry, out of direct sunlight and away from any heat source. Never leave gas in a car on a warm day, never pierce or burn the can, and keep it away from naked flames and sparks. Fill magazines in a well-ventilated area, away from smokers, and keep the can out of reach of children.
Key features
- Green gas from WE, a respected gas blowback manufacturer
- Large 800ml bottle
- Green bottle
- For green gas pistols and rifles
- Large size refills many magazines
- Good choice for regular players with gas replicas
Compatibility
For airsoft replicas designed to run on green gas. Check your replica’s manual before using any gas: some replicas are designed for a specific gas, and using a stronger gas than recommended can increase wear. Not for CO2 replicas, which use CO2 capsules instead.
Care and maintenance
Keep the nozzle clean and fit any cap or cover after use so dirt cannot get into the valve. For your replica, store gas magazines with a small amount of gas inside to keep the seals seated, and put a drop of silicone oil on the magazine fill and output valves now and then to keep the seals supple. Never store magazines fully charged in a hot place.
Who is it for?
This large bottle suits players who use green gas pistols or rifles regularly and want a good supply of gas from a brand that specialises in gas blowback replicas.
Please note: The bottle is pressurised. Store it away from heat and naked flames, and always wear eye protection when using airsoft replicas.
