Description
Classic Army Nemesis DT-4 Double Barrel M4 AEG (Dark Bronze – CA118M-DB)
The Classic Army Nemesis DT-4 is a double-barrel electric M4: two inner barrels fire together from a single trigger pull, fed by two magazines that sit side by side in the magwell. From a distance it looks like a conventional M4, but every shot puts two BBs downrange. This version is finished in dark bronze (CA118M-DB), a warm, earthy tone that suits modern and desert loadouts.
Classic Army has been building airsoft replicas since the 1990s and the DT-4 is one of its most inventive designs. Combined with a programmable electronic trigger, a MOSFET and metal construction, it is a genuinely effective support and suppression rifle as well as a guaranteed talking point at the safe zone.
Twin barrels, one gearbox
A single gearbox with a split cylinder sends air to both inner barrels at once. Each barrel has its own hop-up, adjustable independently, so you can tune the pair to fly together. Classic Army designed the system so both barrels keep the same trajectory and velocity even when one magazine runs dry or is removed.
Both magazines are released together with a single magazine release, so reloading is no slower than on a normal M4. That makes the DT-4 a natural choice for holding a doorway, laying down suppressing fire or pushing a position.
Electronics and controls
Classic Army’s ECS programmable trigger with MOSFET protects the trigger contacts and sharpens trigger response. It also adds programmable burst, motor protection and low-battery detection, which helps protect a LiPo from over-discharge. A Deans-to-Tamiya adapter is supplied.
The controls are familiar M4: a single trigger, ambidextrous fire selector and a functional bolt catch and release. Flip-up front and rear sights are fitted, and an ambidextrous rear sling mount suits either hand.
Build and finish
Construction is metal, giving a solid and rigid feel. The M-Lok handguard lets you add rail sections only where you need them, and the top rail accepts optics. The dark bronze finish makes this one of the more striking versions of an already unusual rifle.
Key features
- Double-barrel M4: two inner barrels firing together
- Two magazines with a single release
- Single gearbox with split cylinder
- Independently adjustable hop-up on each barrel
- ECS programmable trigger with MOSFET
- Burst, motor protection and low-battery detection
- Metal construction, M-Lok handguard
- Flip-up sights and ambidextrous selector
- Dark bronze finish
What’s in the box
- Classic Army Nemesis DT-4 rifle
- Two magazines
- Deans-to-Tamiya battery adapter
Compatibility
The DT-4 uses its own paired magazine set-up, so make sure any spares are listed for the Classic Army DT-4. The M-Lok handguard accepts standard M-Lok rail sections and accessories, and the top rail takes standard 20mm optic mounts. A LiPo is a good partner for the ECS system, and the supplied adapter allows Tamiya-connector batteries to be used.
Care and maintenance
Remove the battery whenever the rifle is not in use and store LiPos at storage charge in a fire-resistant bag; never leave one charging unattended. Use good quality seamless BBs, as poor BBs cause jams and wear hop-up rubbers, and with two barrels there are twice as many to look after.
Clean both inner barrels with a rod and dry patch every few games. Wipe the rifle down after each game, let it dry naturally if it has been rained on, and store it on safe with the hop-ups backed off.
Who is it for?
The DT-4 is for players who want something genuinely different, support gunners who want more BBs downrange without a heavy LMG, and Classic Army fans after a talking-point rifle in an unusual finish.
Please note: Battery and charger are not included; BBs are sold separately. Always wear suitable eye and face protection when using or testing any airsoft replica. Check the rules at your site, including any limits on rate of fire, before play.
