Description
Dominator Air Compressor (220v – DS-U00000)
The Dominator Air Compressor, model DS-U00000, is a mains-powered high-pressure compressor listed for 220v. It lets HPA players fill their own air tanks at home or at the field, instead of relying on a dive shop, paintball site or another player’s fill station.
Dominator is an HPA brand whose range includes regulators, tanks and compressors for airsoft. Owning a compressor is a big step for anyone who plays HPA regularly: it saves trips for refills, lets you top up between games, and makes it practical to run several tanks or HPA replicas. It also suits teams and small sites that want their own fill point.
Using the compressor
Read the manual fully before first use and follow Dominator’s set-up instructions for water, oil or cooling where they apply. Connect your tank with the correct fill adaptor, open the valves as the manual describes, and fill gradually while watching the gauge. Stop at the tank’s rated pressure, close the valves and bleed the line before removing the tank.
Compressors get warm in use, so plan breaks as the manual recommends rather than running it continuously, especially when filling large tanks or several tanks in a row.
Safety
High-pressure air is dangerous if handled carelessly. Only fill tanks that are in date, undamaged and rated for the pressure you are filling to, never exceed the tank’s rated pressure, and fill slowly so the tank does not overheat. Keep hands and face away from fittings while the system is pressurised, and always bleed the line before disconnecting.
Key features
- Dominator high-pressure air compressor
- Listed for 220v mains
- Fill your own HPA tanks at home or at the field
- Saves trips to dive shops or fill stations
- Useful for players, teams and small sites
- Model DS-U00000
Compatibility
An HPA compressor is used to fill high-pressure air tanks for HPA airsoft systems and similar air-powered equipment. Check that the compressor’s fill fitting and maximum pressure suit your tanks, and that you have the right adaptors, before ordering. Read the manual for the electrical supply it needs.
Care and maintenance
Run the compressor in a cool, dry, well-ventilated place on a firm surface, keep its intakes and vents clear, and follow the manufacturer’s guidance on running time and rest periods so the motor does not overheat. Drain any moisture as the manual directs, and check filters, hoses and fittings regularly.
Always switch off and unplug the compressor before any maintenance, and have electrical faults dealt with by someone qualified. Store it covered, dry and away from dust.
Who is it for?
This compressor is for HPA players, teams and sites who want to fill their own tanks rather than depend on outside fill stations.
Please note: Tanks, regulators and fill adaptors are not included unless shown. Follow the manual and never fill a tank beyond its rated pressure.
