New website launch: 15% off with code LAUNCH15 · Ends 30 Nov · Excludes sale items Skip to content
FAMILY-RUN. PLAYER-FOCUSED.VISIT US IN THETFORD
Guarder logoMore from Guarder ›

Guarder Cut Off Lever For Gearbox Ver 2 (GE-07-09)

£7.95

Stock by location
Thetford ShopOut of stock
WarehouseOut of stock

Out of stock

Out of stock: get an email when it's back

We'll email you once when this item is back in stock, then delete your address. We won't use it for anything else.

Rated 4.7 out of 5from 130 Google reviewsRead our reviews

Win up to £150 in our free monthly airsoft quiz

Description

Guarder Cut Off Lever for Gearbox Ver 2 (GE-07-09)

This is a cut-off lever from Guarder for Version 2 AEG gearboxes, listed under part code GE-07-09. Guarder is a respected Taiwanese upgrade parts maker, and the cut-off lever is a small but important part that makes semi-automatic fire work correctly. A worn or damaged cut-off lever can cause runaway bursts in semi or a sluggish trigger reset.

Replacing it with a quality part restores clean, reliable semi-auto operation, and is a common job during any thorough gearbox service.

What the cut-off lever does

In semi-automatic, the sector gear pushes the cut-off lever as it completes each cycle. The lever then lifts the trigger contacts away from each other, cutting power to the motor so that only one shot is fired. When you release the trigger, the lever resets ready for the next shot. Because it is struck every time the gun fires in semi, it is subject to steady wear.

Fitting

Fitting a cut-off lever means opening the gearbox, so make sure spring tension is released first. Note the position of the lever’s spring and check that the lever moves freely once fitted. Test the rifle in semi to confirm it fires a single shot per trigger pull before reassembling fully. If you are unsure, ask an airsoft technician.

Key features

  • Cut-off lever from Guarder
  • For Version 2 gearboxes
  • Restores reliable semi-auto operation
  • Helps cure runaway bursts in semi
  • Part code GE-07-09
  • A common gearbox service part

Compatibility

For Version 2 AEG gearboxes built to the Tokyo Marui pattern. Version 3 gearboxes use a different lever, which Guarder makes separately. Some makers use non-standard internals, so compare with your existing part before ordering.

Care and maintenance

Inspect the cut-off lever and the sector gear’s cut-off cam whenever the gearbox is open. Keep the gearbox lightly and correctly greased, and avoid getting grease on the trigger contacts. Release spring tension before any gearbox work.

Who is it for?

This part is for owners of Version 2 AEGs, such as many M4 and MP5 style rifles, and technicians servicing a gearbox or fixing semi-auto problems.

Airsoft replica or accessory only, as described. For help choosing compatible equipment, contact OnlyAirsoft.

Free UK delivery over £50From £3.95Free click & collectCastle Street, ThetfordSpread the costPay with KlarnaFREE two-tone sprayingNo UKARA? Adds just 24 hoursPrice match promiseFound it cheaper? Tell usTry before you buyIndoor shooting range
Rated 4.7 out of 5 from 130 Google reviewsRead our reviewsLeave a review