Description
Guarder G3 Series/PSG-1 Steel Retainer Pins (G3-03)
These are steel retainer pins from Guarder for G3 series and PSG-1 replicas, listed under part code G3-03. Guarder is a respected Taiwanese maker of upgrade parts, and steel pins are one of the simplest upgrades for a G3-pattern rifle. The pins hold the main sections of the rifle together, and stock pins can wear, bend or go missing, especially on rifles that are stripped regularly.
Losing a pin at a game can put a rifle out of action, so a set of strong replacement pins is worth having in your kit even if your originals are still in place.
Why steel pins
Retainer pins on G3-pattern rifles are pushed in and out whenever you strip the rifle to reach the battery, gearbox or hop-up. Steel pins are less likely to bend or wear than softer stock parts, which helps the rifle stay tight and secure. The number of pins in the set is not stated in our listing, so check the product photos to see how many you will receive.
Fitting
Pins should push in and out with firm hand pressure or a light tap from a punch. Make sure the parts are lined up before inserting each pin, and never force a pin, as this can damage the receiver. Check that every pin is fully seated before use.
Key features
- Steel retainer pins from Guarder
- For G3 series and PSG-1 replicas
- Stronger than many stock pins
- Replaces worn, bent or lost pins
- Helps keep the rifle tight
- Part code G3-03
Compatibility
Listed for G3 series and PSG-1 replicas. Pin sizes can vary between manufacturers, so check your replica’s make and model and compare with your existing pins before ordering.
Care and maintenance
Wipe the pins clean and apply a very light film of oil to prevent rust. Store spare pins in a small bag so they are not lost. Inspect them whenever you strip the rifle and replace any that are bent or worn.
Who is it for?
These pins are for owners of G3 series and PSG-1 replicas who want stronger pins or need to replace worn or lost ones.
