Description
UFC BOBRO Style T1 QD Mount with Riser (Black)
The UFC BOBRO Style T1 QD Mount with Riser is a black quick-detach mount for T1-type micro red dot sights. It is styled on the well-known BOBRO quick-detach mounts and raises the sight above the rail, so you can look through it with a more upright, natural head position.
A riser makes a real difference when you are wearing a full-face mask, goggles or a helmet, as you no longer have to press your cheek down onto the stock to find the dot. The quick-detach design lets you take the sight off and put it back on without tools, which is handy for transport or for moving one red dot between replicas. A tan version is also listed.
Design
The top of the mount takes a T1-type micro red dot, fixed with the sight’s own screws, while the base clamps to the rail with a lever-operated, BOBRO-style quick-detach mechanism. The black finish matches most replicas and most T1-style sights.
Because a T1-type sight is so compact, a riser mount like this keeps the whole set-up short, leaving room on the top rail for a flip-to-side magnifier behind it if you want extra reach.
Using it
Fit your sight to the mount, then clamp the mount to the top rail at a comfortable distance from your eye. Check the lever closes firmly by hand. After zeroing, note the rail slot you used so the sight returns to the same place when you refit it.
If you co-witness with iron sights, check the photos and compare the mount height with your sights before buying, as a riser usually puts the dot above standard iron sight height.
Key features
- Quick-detach mount for T1-type micro red dots
- BOBRO-style QD design
- Riser lifts the sight for a heads-up position
- Comfortable with masks, goggles and helmets
- Compact base leaves rail space
- Black finish; also listed in tan
Compatibility
Made for T1-type micro red dots, including the UFC T1 sights we list, and a standard 20mm Picatinny-style top rail. Some other micro dots share the T1 footprint, but check your sight’s base before ordering. The red dot sight is not listed as included.
Care and maintenance
Check the QD lever tension and the sight screws before each game, as vibration can loosen fixings over a day’s play. Wipe the mount clean of mud and grit, especially around the lever, and avoid over-tightening screws into the sight base.
Store the mount dry; if it has been out in the rain, dry it before putting it in a bag.
Who is it for?
Players running a T1-type red dot who wear full-face protection or a helmet and want a higher, more comfortable sight line, or who move one sight between replicas.
Please note: The red dot sight shown in any photos is not listed as included. Check sight and rail compatibility before ordering.
